SL-420 log debarker sold to a Kazakhstan timber custome
Our log debarkers run in timber yards across more than 30 countries. This order came from a timber customer in Kazakhstan, who confirmed the SL-420 log debarker in the configuration below:
| غرض | Confirmed specification | الكمية |
|---|---|---|
| SL-420 log debarker | Motor: 15 kW (main) + 4 kW (feed) Voltage: 380V, 50Hz, 3 phase Suitable log diameter: 12-38 cm Package size: 2.6 x 1.9 x 2.4 m Weight: 2,600 kg Price: EXW price | 1 مجموعة |
What this Kazakhstan customer needed the debarker for
The customer handles round timber and strips the bark before the logs go on to the next processing stage. Bark left on the wood slows every step that follows and lowers what the finished material is worth, so he wanted a machine that runs a full working day without constant jam clearing or blade changes.
He measured before he asked. The diameter range he sent us, 12-38 cm, settled the model choice before price did. Had he guessed instead, he would likely have bought either too small a frame for his largest rounds or a heavier one than his yard needs.
Why the SL-420 was the right model for 12-38 cm logs
In our vertical debarker lineup, log diameter decides the model before anything else does:
- إس إل-370 – logs from 10 cm to 35 cm
- إس إل-420 – logs up to 40 cm in diameter
- SL-460 – logs from 12 cm to 42 cm and above, for large forestry volumes
With most of his material in the 12-38 cm band, the SL-420 log debarker gave this customer headroom on his largest rounds without the cost of the next frame size up.
The machine holds the log with four feeding rollers in and four out, so the timber does not slip while the cutters work, and the line speed reaches about 10 m per minute. On straight, freshly cut logs the peeling rate is above 95%. The blades are 45# steel and the frame is Q235 plate, so you can replace wear parts cheaply instead of buying a whole assembly every season.
Power supply, machine type, and delivery
Three-phase 380V at 50Hz is the standard industrial supply in Kazakhstan, and our machines leave the factory set to this configuration, so no electrical customization was required for this order. A grid outside this standard does need the motor specified accordingly.
This is a vertical log debarker, which suits straight rounds. A yard handling more branches, curved, or irregular logs would need our مزيل الأسطوانة instead, and we advise that swap when the material calls for it.
The unit shipped as one set under EXW terms, and the customer’s forwarder planned collection around the 2,600 kg weight and 2.6 x 1.9 x 2.4 m package.
What the SL-420 log debarker cost
The price on this order was USD 5,900 EXW for the machine set. Treat that as one real data point rather than a catalog price, because a quotation moves with the model size, motor power and voltage, the number of blades and spare parts added, and any feeding options. We have covered what affects the wood debarking machine cost separately.
Other log debarker cases you can compare
- SL-460 wood log debarker for a Russian forestry company – the next size up for large-volume logging
- SL-370 debarking machine sold to Pakistan – mid-diameter poplar rounds
- Diesel-powered SL-370 wood debarker for a Chile timber mill – the off-grid option
How much does an SL-420 log debarker cost?
This order was priced at USD 5,900 EXW for one SL-420 set. Quotations vary with motor power, voltage, blade and spare-part quantities, and feed options, so the same model can cost differently for two buyers.
What log diameter can the SL-420 debarker process?
The SL-420 handles logs up to 40 cm, which covered this customer’s 12-38 cm material. Smaller diameters suit the SL-370 (10-35 cm) and larger or heavier-volume timber suits the SL-460 (12-42 cm).
Does the machine need customization for a 380V grid?
No. Three-phase 380V at 50Hz is both our factory default and Kazakhstan’s industrial supply standard. Buyers on a different grid should specify their voltage before ordering.
Is the SL-420 suitable for curved or branch wood?
This vertical debarker is built for straight logs. For branches, curved, or irregular rounds a roller debarker is the correct choice, because its rollers grip uneven shapes a vertical machine cannot.
Contact us now for a detailed quote!
Send us the diameter range of your logs, as this customer did, through the contact page, and our engineers will quote the SL-370, SL-420, or SL-460 configuration that fits your material rather than the one that sells easiest.
